Oct 06, 2026 / By Munther Amirah / in Buying guides Electronic
An Elecolux lighting project in Jordan works when the driver voltage matches the strip or spotlight. A 12V driver will not feed a line marked 24V, and an IP65 outdoor spot is not replaced by an indoor lamp on a facade.
Elecolux is a project line: recessed spots, step lights, outdoor globes, aluminum profile, and drivers. These parts are assembled from a plan. They are not one ready chandelier.
A recessed white spotlight in three CCT colors, COB, rated IP65. A step light about 6 by 10 cm at 3W, 3000K, IP65. An outdoor globe at 30W and about 25 cm, 3000K, with a motion sensor and IP54, plus a 20W globe at 4000K, also IP54. Drivers include 100W at 12V, and 150W, 200W, and 300W at 24V with 0-10V dimming, plus a control panel for that dimming. Aluminum corner profile and 90-degree joins build a continuous light line.
Each row is a different job. Voltage and protection are read from the product name.
| Layer | Example | What must match |
|---|---|---|
| Indoor or wet spotlight | Recessed COB CCT, IP65 | Ceiling cut-out and color |
| Steps | 3W, 3000K, IP65 | Number of steps, not room power |
| Garden | 20W or 30W globe, IP54 | 3000K or 4000K |
| Strip power | 100W 12V or 150-300W 24V | Load voltage and total watts |
| Dimming | 0-10V dimmer panel | A driver that supports 0-10V |
An outdoor stair in Amman collects dust, so the IP65 rating on a step light matters more than the cover shape. An IP54 globe in a garden needs distance from a sprinkler. Put the driver in a ventilated ceiling or panel, not above an oven or in a sealed box, because a long summer on 230V heats a driver that is loaded near its limit.
Each one feeds only a load at the voltage written on it. A 100W 12V unit does not replace the 150W, 200W, or 300W drivers at 24V.
The published name says three colors, COB CCT. That is a color-temperature choice, not three separate lamps.
The piece is about 6 by 10 cm, 3000K, IP65, and is meant for the step itself. It does not light a living room.
No. It needs a driver marked DIMM 0-10V and the matching control panel from the range.
Write down load voltage and total watts before ordering the driver. Browse Elecolux or see lighting.
Oct 18, 2026 by Munther Amirah
Oct 18, 2026 by Munther Amirah
Cookie preferences
